	Hyundai Matrix service from 2002 to 2006 of release
		1. Operation and car maintenance
		2. Engine
			2.1. Maintenance
			2.2. Mechanical part (engine of 1,6 l)
			2.3. Mechanical part (engine of 1.8 l)
			2.4. Cooling system
			2.5. Greasing system
			2.6. Power supply system
			2.7. Control system, fuel system and system of decrease in toxicity
			2.8. Tables
		3. Transmission
		4. Running gear
		5. Steering mechanism
		6. Brake system
		7. Onboard electric equipment
		8. Body
		9. Electric equipment schemes

강남 오만식 공식 홈페이지 omansik.com 가라오케 셔츠룸 레깅스룸 하이퍼블릭 정보 제공

2-dvigatel.html

2. Engine

Check of level of engine oil

Replacement of engine oil

Choice of the oil filter

Replacement of the oil filter

Check of tightness of system of cooling

Check of valves of a cover of a radiator

Check of concentration of antifreeze

Compression check

Adjustment of a tension of a belt of a drive of GRM

Drive of hinged units

Natyazhitel of a belt of a drive of hinged units

Adjustment of a belt of a drive of hinged units

Adjustment of a belt of a drive of the generator

Mechanical part (engine of 1,6 l)

Check of the block of cylinders

Removal and installation of a support of the power unit

Removal and engine and transmission installation assembled

Removal, check and installation of camshafts

Removal, check and installation of a belt of a drive of the mechanism of a gazoraspredeleniye

Dismantling, check and assembly of a cranked shaft

Removal, check and installation of a flywheel (MKPP) or plate of a drive of the hydrotransformer (AKPP)

Dismantling and assembly of shatunno-piston group

Mechanical part (engine of 1.8 l)

Adjustment of a tension of a belt of a drive of GRM

Adjustment of a belt of a drive of hinged units

Removal, check and installation of camshafts

Check and gap adjustment in a drive of valves

Dismantling, check and assembly of a cranked shaft

Removal, check and installation of a flywheel (MKPP) or plate of a drive of the hydrotransformer (AKPP)

Dismantling and assembly of shatunno-piston group

Dismantling, check and assembly of a head of the block of cylinders

Removal, check and installation of a belt of a drive of the mechanism of a gazoraspredeleniye

Centrifugal pump of system of cooling

Removal, check and installation of a radiator of system of cooling

Check of a cover of a radiator

Removal, check and thermostat installation

The sensor of temperature of cooling liquid

Greasing system

General information

Removal, check and installation of the oil pump

Power supply system

Removal, check and installation of a final collector

Removal, check and installation of an inlet collector

Removal, check and installation of the air filter

Control system, fuel system and system of decrease in toxicity

Main malfunctions and their reasons

Check of a technical condition (Check of frequency of rotation of the crankshaft of the engine idling)

Check of operability of the fuel pump

System of compulsory ventilation of a case

Catching system паров fuels

System of supply of fuel

Check of a control system by the engine with the distributed injection

Removal, check and installation of fuel nozzles

System of decrease in toxicity of the fulfilled gases

Removal and installation of the main exhaust silencer

Check of tightness of system of production of the fulfilled gases

Cars with catalytic converter in system of production of the fulfilled gases

Service regulations of cars with catalytic converter in system of production of the fulfilled gases

The table 2.1 Dependence between density of cooling liquid and concentration этиленгликоля

Nomenalnye's table 2.2 adjusting data of belts of a drive of hinged units

Table 2.3 Technical characteristics of the engine in volume of 1,6 l

Table 2.4 Moments of an inhaling of carving connections of the engine in volume of 1,6 l

Table 2.5 Searches of causes of defect and ways of their elimination

Table 2.6 Searches of causes of defect of hydrojacks and ways of their elimination

Table 2.7 Repair size of a piston ring and identification label

Table 2.8 Technical characteristics of the engine in volume of 1,8 l

Table 2.9 Moments of an inhaling of carving connections of the engine in volume of 1,8 l

Table 2.10 Searches of causes of defect and ways of their elimination

Table 2.11 Nominal adjusting data of belts of a drive of hinged units

Table 2.12 Repair size of a piston ring and identification label

Table 2.13 the Repair sizes of openings under saddles of valves

Table 2.14 the Repair sizes of directing plugs of valves

Table 2.15 Technical characteristics of a control system

Table 2.16 Data for check

Table 2.17 Moments of an inhaling of carving connections

Table 2.18 Applied hermetics

Table 2.19 Search of malfunctions in system of supply of fuel

Table 2.20 Search of malfunctions in system of supply of fuel

Table 2.21 When engine cold

Table 2.22 When engine cold

Table 2.23 Diagnostic codes of malfunctions (1.6 l, 1.8 l with the European onboard system of diagnostics)

Table 2.24 Diagnostic codes of malfunctions (1.6 l, 1.8 l without the European onboard system of diagnostics)

The table 2.25 Check by means of a tester

«previous page
1.8.9. Table 1.9 Safety locks of the block being in salon of the car

following page»
2.1. Maintenance