Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
강남 퍼펙트 가라오케
Сегодняшний совет:
Сайт админа:
https://mm.peniks.ru
- онлайн сборник тут бесплатное онлайн русские женщины и игрушки секс !
3-transmissiya.html
3. Transmission
Coupling
General information
Pumping of a hydraulic actuator of coupling
Removal and installation of the main cylinder of a hydraulic actuator of coupling
Removal and installation of a pedal of coupling
Check of the switch of blocking of ignition
Removal, check and installation of a casing of coupling and conducted disk
Dismantling, check and assembly of the working cylinder of coupling
Mechanical transmission
Technical operations on the car
Removal and installation of a mechanical box предач
Removal, check and installation of the mechanism of gear shifting
Automatic transmission
The main checks and adjustments on the car (A4AF3)
Check of chains of the switch of blocking of a starter (AKPP selector switch)
Check of components of a control system by an automatic transmission
Hydrotransformer check on completely braked car (Тorque converter stall test)
The analysis of results of check on completely braked car
Pressure check in AKPP hydrocontrol system
Self-diagnostics function
Technical operations on the transmission removed from the car
Pressure check in AKPP hydrocontrol system
Hydrotransformer check on completely braked car (Stall test)
The main checks and adjustments on the car (A4A42)
Adjustment of the lowered pressure
Removal and installation of an automatic transmission (A4A42)
Removal and installation of an automatic transmission (A4AF3)
Mechanism of management of an automatic transmission
Driving mechanism
Removal, check and installation of a shaft of a drive of a forward wheel
Shaft of a drive of a forward wheel (the CV JOINT with the jack of length (DOJ) and the CV JOINT «Birfilda BJ»)
Shaft of a drive of a forward wheel (CV JOINT «Tripod TJ»)
Nave of a forward wheel and rotary fist of a detail
Nave of a back wheel
Tables
Table 3.1 Technical characteristics
Table 3.2 Data for check and adjustment
Table 3.3 Moments of an inhaling of carving connections
Table 3.4 Possible malfunctions, their reasons and ways of elimination
Table 3.5 Technical characteristics of a mechanical transmission
Table 3.6 Possible malfunctions, their reasons and ways of elimination
Table 3.7 Technical characteristics of automatic transmissions
Table 3.8 Nominal rate
Table 3.9 Nominal rate
Table 3.10 Check of pressure in AKPP hydrocontrol system
Table 3.11 Search of malfunctions in sizes of pressure in AKPP hydrocontrol system
Table 3.12 Road tests (Road test)
Table 3.13 Codes malfunctions (description)
Table 3.14 Search of malfunctions in diagnostic codes
Table 3.15 the check points Components functioning at inclusion of each transfer
Table 3.16 For identification of persistent bearings, holders of persistent bearings and persistent washers
The table 3.17 Nominal rates of pressure in AKPP hydrocontrol system
Table 3.18 Preliminary search of malfunctions in case of existence of inappropriate pressure
Table 3.19 Technical characteristics of the driving mechanism
Table 3.20 Moments of an inhaling of carving connections
Table 3.21 Search of malfunctions
«
previous page
2.8.25. The table 2.25 Check by means of a tester
following page
»
3.1. Coupling
