Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.1.1. Check of level of engine oil
2.1.2. Replacement of engine oil
2.1.3. Choice of the oil filter
2.1.4. Replacement of the oil filter
2.1.5. Check of tightness of system of cooling
2.1.6. Check of valves of a cover of a radiator
2.1.7. Check of concentration of antifreeze
2.1.8. Compression check
2.1.9. Adjustment of a tension of a belt of a drive of GRM
2.1.10. Drive of hinged units
2.1.11. Natyazhitel of a belt of a drive of hinged units
2.1.12. Adjustment of a belt of a drive of hinged units
2.1.13. Adjustment of a belt of a drive of the generator
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 









2-1-6-proverka-klapanov-kryshki-radiatora.html

2.1.6. Check of valves of a cover of a radiator

Fig. 2.6. A special adapter for connection of a cover of a radiator to a tester


Use a special adapter for connection of a cover of a radiator to a tester (fig. 2.6).
Increase pressure until the arrow of a manometer will not stop (pressure of opening of the valve).
Pressure of opening of the main valve: 83–110 kPas.
Pressure of opening of the vacuum valve: 7 kPas.
Be convinced that pressure of operation of valves of a cover or corresponds to nominal rate, or a little above it.
Replace a radiator cover if pressure of operation of valves is lower than nominal rate.

NOTE
Before check be convinced that a radiator cover pure as the rust or other extraneous substances on sealing laying of a cover can serve as the reason of the wrong indications of a manometer.

«previous page
2.1.5. Check of tightness of system of cooling
following page»
2.1.7. Check of concentration of antifreeze