3.3.6. Pressure check in AKPP hydrocontrol system

Warm up the engine and AKPP so that the oil temperature in AKPP (ATF) reached normal working value (80-100°C).

Lift the car on the lift so that to hang out driving wheels.

Fig. 3.59. Openings for manometer connection

Connect special adaptations (an adapter and a manometer) to the corresponding openings for pressure check (fig. 3.59).

Measure pressure of oil in (ATF) AKPP in each highway under the conditions given in table 3.10, and check compliance of the measured sizes to nominal rates.

If the measured pressure falls outside the limits nominal rates, eliminate malfunction according to table 3.11.