Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.7.1. Main malfunctions and their reasons
2.7.2. Check of a technical condition (Check of frequency of rotation of the crankshaft of the engine idling)
2.7.3. Check of operability of the fuel pump
2.7.4. System of compulsory ventilation of a case
2.7.5. Catching system паров fuels
2.7.6. System of supply of fuel
2.7.7. Check of a control system by the engine with the distributed injection
2.7.7.1. A control lamp of malfunction (cars with the European onboard system of diagnostics)
2.7.7.2. Cars without the European onboard system of diagnostics
2.7.7.3. A ratio between codes of malfunctions and the characteristic of process of driving of the car
2.7.7.4. Sensor of absolute pressure
2.7.7.5. Conditions of storing of codes of malfunctions
2.7.7.6. Control lamp of malfunction
2.7.7.7. The sensor of temperature of soaked-up air
2.7.7.8. Conditions of storing of codes of malfunctions
2.7.7.9. Control lamp of malfunction
2.7.7.10. The sensor of temperature of cooling liquid
2.7.7.11. Conditions of storing of codes of malfunctions
2.7.7.12. Sensor of provision of a butterfly valve
2.7.7.13. Conditions of storing of codes of malfunctions
2.7.7.14. The sensor of concentration of oxygen (with heating)
2.7.7.15. Conditions of storing of codes malfunctions (P0130 code)
2.7.7.16. Conditions of storing of codes malfunctions (P0136 code)
2.7.7.17. Conditions of storing of codes malfunctions (P0131 code)
2.7.7.18. Conditions of storing of codes malfunctions (P0131 code)
2.7.7.19. Conditions of storing of codes malfunctions (P0132 code)
2.7.7.20. Conditions of storing of codes malfunctions (P0138 code)
2.7.7.21. Conditions of storing of codes malfunctions (P0133 code)
2.7.7.22. Conditions of storing of codes malfunctions (P0134 code)
2.7.7.23. Conditions of storing of codes of malfunction
2.7.7.24. Causes of defect
2.7.7.25. Working capacity check aurally
2.7.7.26. Resistance check on nozzle conclusions
2.7.7.27. Ignition coil
2.7.7.28. Conditions of storing of codes of malfunction
2.7.7.29. Detonation sensor
2.7.7.30. Conditions of storing of codes of malfunction
2.7.7.31. Sensor of position of the crankshaft
2.7.7.32. Conditions of storing of codes of malfunction (Р0335)
2.7.7.33. Conditions of storing of codes of malfunction (Р0335)
2.7.7.34. Sensor of provision of a camshaft
2.7.7.35. Conditions of storing of codes of malfunction
2.7.7.36. Catalytic converter
2.7.7.37. Conditions of storing of codes of malfunction
2.7.7.38. Electromagnetic valve of a purge of an adsorber
2.7.7.39. Conditions of storing of codes of malfunction
2.7.7.40. Idling regulator
2.7.7.41. Conditions of storing of codes of malfunction
2.7.7.42. System of regulation of structure of a working mix
2.7.7.43. Conditions of storing of codes of malfunction (short-term regulation of structure of a mix)
2.7.7.44. Conditions of storing of codes of malfunction (long-term regulation of structure of a mix)
2.7.7.45. Sensor of speed of movement of the car
2.7.7.46. Conditions of storing of codes of malfunction (at Р1307)
2.7.7.47. Conditions of storing of codes of malfunction (at Р1308, Р1309)
2.7.7.48. Electronic control unit engine
2.7.7.49. Check of a chain of connection with "weight"
2.7.7.50. Switch and conditioner relay
2.7.7.51. Check by means of a tester
2.7.8. Removal, check and installation of fuel nozzles
2.7.9. System of decrease in toxicity of the fulfilled gases
2.7.10. Removal and installation of the main exhaust silencer
2.7.11. Check of tightness of system of production of the fulfilled gases
2.7.12. Cars with catalytic converter in system of production of the fulfilled gases
2.7.13. Service regulations of cars with catalytic converter in system of production of the fulfilled gases
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 









2-7-7-28-usloviya-zapominaniya-kodov-neispravnosti.html

2.7.7.28. Conditions of storing of codes of malfunction

EBU brings the P0300 code in memory, and the control lamp of malfunction of a control system of the engine if in two cycles of driving there are 2 admissions of ignition of a working mix on 100 turns of a cranked shaft lights up.
Frequency of admissions of ignition is measured through each 200 turns of a cranked shaft in the presence of the following conditions:
– speed of change of frequency of rotation of a cranked shaft does not exceed 1000 mines-1 in a second;
– frequency of rotation of a cranked shaft is in limits of 600-4000 mines-1;
– loading of the engine is higher than 2 milliseconds;
– otsechka of fuel do not occur;
– the starter does not work;
– the car moves on the equal road (the sensor of acceleration defines accelerations no more than 0,3 д).
If frequency of repetition of admissions of ignition for 200 turns of a cranked shaft increases for 5–25 %, there is a danger of failure of catalytic converter, and a lamp of malfunction of a control system of the engine at first lights up blinking, and then constant light. At sufficient high frequency of repetition of admissions of ignition the temperature of catalytic converter can reach 1950 °C. Storing of EBU of this code indicates malfunction of a chain of ignition of the corresponding cylinder.



«previous page
2.7.7.27. Ignition coil
following page»
2.7.7.29. Detonation sensor