|
5-1-9-snyatie-i-ustanovka-vozvratnojj-trubki-i-shlanga.html
5.1.9. Removal and installation of a returnable tube and hoseRemoval
Remove a tank of hydrosystem of the amplifier of a steering from its arm.
Remove clamps of fastening of a returnable tube and a hose.
Remove an inlet air hose of the engine assembled.
Disconnect delivery and returnable tubes from the steering mechanism assembled.
Lift the car on the lift and remove a clamp of fastening of returnable and delivery tubes.
Lower the car and disconnect a clamp of fastening of a returnable tube and a hose.
Installation
Installation of details is made as it should be, the return to removal.
|
NOTE
At installation of a delivery hose and a tube be assembled convinced that they are not overwound and there is no possibility of their contact to other details of the car.
|
After completion of installation remove air from hydrosystem of the amplifier of a steering.
| 