Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.1.1. Technical operations on the car
5.1.2. A steering with the amplifier
5.1.3. Removal, check and installation of a steering column and shaft
5.1.4. Removal and installation of the lock of a steering column
5.1.5. Removal and installation of the driveshaft of a steering
5.1.6. Removal of the steering mechanism
5.1.7. Dismantling, assembly and installation of the steering mechanism
5.1.8. Removal and installation of hoses of hydrosystem of the amplifier of a steering
5.1.9. Removal and installation of a returnable tube and hose
5.1.10. Steering check with the amplifier
5.1.11. Removal, dismantling, check and assembly of the pump of the hydraulic booster of a steering
5.2. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 









5-1-3-snyatie-proverka-i-ustanovka-rulevojj-kolonki-i-vala.html

5.1.3. Removal, check and installation of a steering column and shaft


Removal

Fig. 5.13. A wire detachment from the negative plug of the storage battery


Disconnect a wire from the negative plug of the storage battery (fig. 5.13).

Fig. 5.14. Safety cushion module


Remove the module of a safety cushion of the driver (fig. 5.14).

NOTE
On models without a safety cushion of the driver remove an overlay of the switch of a sound signal.


Fig. 5.15. Nut of fastening of a steering wheel


Unscrew самоконтрящуюся a nut of fastening of a steering wheel (fig. 5.15).

Fig. 5.16. Removal of a steering wheel


Put adjusting labels of relative provision of a shaft of a steering and a steering wheel, then remove a steering wheel by means of the special tool (fig. 5.16).

Fig. 5.17. Bolts of fastening of the top and bottom casings of a steering column


Remove the top and bottom casings of a steering column (fig. 5.17).

Fig. 5.18. Sockets of the podrulevy combined switch


Disconnect sockets from the podrulevy combined switch (fig. 5.18).

Fig. 5.19. Bolts of fastening of the podrulevy combined switch


Unscrew three bolts of fastening shown in drawing 5.19, then remove podrulevy the combined switch assembled.

Fig. 5.20. Screws of fastening of the bottom cover of the dashboard


Unscrew four screws of fastening shown in drawing 5.20, and remove the bottom cover of the dashboard.

Fig. 5.21. Bolts of fastening of a steering column in collecting and the steering driveshaft


Unscrew five bolts of fastening of a steering column in collecting and the steering driveshaft, shown in drawing 5.21.

Fig. 5.22. Removal of a steering column and steering shaft


Unscrew bolts and fastening nuts, then remove a steering column and a steering shaft assembled (fig. 5.22).

Check
Check a steering shaft on absence of deformation and damages.
Check places of connections on absence excessive люфта, damages and jamming (smoothness of moving).
Check bearings of kardanny hinges of a steering on lack of wear and damages.

Installation
Installation is made as it should be, the return to removal.

«previous page
5.1.2. A steering with the amplifier
following page»
5.1.4. Removal and installation of the lock of a steering column