Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. External elements of a body
8.2.1. Removal and cowl installation
8.2.2. Adjustment of provision of a cowl and its lock
8.2.3. Removal and installation of a door of a back
8.2.4. Adjustment of a door of a back and lock bracket
8.2.5. Removal and installation of a forward door
8.2.6. Removal and windscreen installation
8.2.7. Removal and installation of glass of a door of a back
8.3. System of passive safety
8.4. Heater and conditioner
8.5. Tables
9. Electric equipment schemes
 









8-2-5-snyatie-i-ustanovka-perednejj-dveri.html

8.2.5. Removal and installation of a forward door

Upholstery removal
Weaken the screw of fastening of the internal handle of a door and disconnect it.
Be weakened screws of fastening of the lateral panel of a door.
By means of a stripper remove the lateral panel.

Fig. 8.16. Removal of an upholstery of a door


By means of a screw-driver disconnect an upholstery of a forward door (fig. 8.16).

Glass and window regulator removal

Fig. 8.17. Glass lowering



In pressing the window regulator switch carefully lower glass so that in an aperture of a box of a door there were 2 bolts of fastening of glass, and unscrew bolts.

Fig. 8.18. Glass extraction


Remove glass from a sealant and carefully take out from an aperture (fig. 8.18).

Fig. 8.19. Socket of the electric motor of a window regulator


Separate the socket of the electric motor of a window regulator (fig. 8.19).

Fig. 8.20. Window regulator fastening


Remove a window regulator assembled, having unscrewed nuts of fastening of the mechanism of a window regulator (4EA) and a nut of fastening of the electric motor (ZEA) (fig. 8.20).
Remove a forward fillet, having unscrewed nuts of fastening (2EA).

Fig. 8.21. Bolts of fastening of the lock


Unscrew screws of fastening of the lock (fig. 8.21).
Remove assembly bolts of the limiter of opening of a forward door (2EA).
Remove forward assembly bolts of a door loop and disconnect a connector.

Fig. 8.22. Removal of a forward door


Remove a forward door (fig. 8.22).

Installation
Installation is made as it should be, the return to removal.
Removal and installation of an external rear-view mirror

Fig. 8.23. External rear-view mirror




Removal

Fig. 8.24. Slip removal


Remove a slip (fig. 8.24).

Fig. 8.25. Socket of wires


Separate the socket of wires (fig. 8.25).

Fig. 8.26. Mirror removal


Remove an external rear-view mirror, having unscrewed fastening bolts (fig. 8.26).

Installation
Installation is made as it should be, the return to removal.

«previous page
8.2.4. Adjustment of a door of a back and lock bracket
following page»
8.2.6. Removal and windscreen installation