5.1.6. Removal of the steering mechanism

Fig. 5.27. Steering mechanism

Fig. 5.28. Inlet air hose of the engine

Remove an inlet air hose of the engine assembled (fig. 5.28).

Disconnect clamps delivery and returnable шлагов hydrosystems of the amplifier.

Merge working liquid from hydrosystem of the amplifier.

Disconnect delivery and returnable tubes from unions of the steering mechanism.

Fig. 5.29. Driveshaft detachment

Disconnect the steering driveshaft from the steering mechanism in salon (fig. 5.29).

Remove a tape collar and вытолкните a protective cover of a shaft of a steering, then remove a basic plate of a protective cover.

Will hang out car wheels.

Remove forward wheels.

Fig. 5.30. A detachment of the spherical hinge of a tip of steering draft from a rotary fist

Take шплинт, unscrew a nut of fastening and disconnect the spherical hinge of a tip of steering draft from a rotary fist with the help of the special tool (09568-31000) (fig. 5.30).

Fig. 5.31. Right arm of fastening of the stabilizer of cross-section stability

Remove the right arm of fastening of the stabilizer of cross-section stability (fig. 5.31).

Fig. 5.32. Forward exhaust silencer

Remove the forward exhaust silencer assembled (fig. 5.32).

Fig. 5.33. Brackets of fastening of the steering mechanism

Remove brackets of fastening of the steering mechanism and clamps of delivery and returnable tubes (fig. 5.33).

Fig. 5.34. Extraction of the steering mechanism assembled through an arch of the right forward wheel

Take the steering mechanism assembled through an arch of the right forward wheel (fig. 5.34).

NOTE Take the steering mechanism slowly and very carefully not to damage protective covers of steering drafts and spherical hinges of tips of steering drafts.