8.2.3. Removal and installation of a door of a back

Removal

Fig. 8.4. Socket of wires of an element of heating of back glass

Disconnect the socket of wires of an element of heating of back glass (fig. 8.4).

Remove facing of a door of a back.

Fig. 8.5. Removal of an additional stoplight

Remove an additional stoplight (fig. 8.5).

Fig. 8.6. Removal of the top decorative slip

Remove the top slip from a frame of a back door (fig. 8.6).

Fig. 8.7. Removal of the panel of furnish of a door of a back

Turn off four being self-cut screws and remove the panel of furnish of a door of a back (fig. 8.7).

Fig. 8.8. Removal of the lateral panel of furnish of a door of a back

Remove the lateral decorative panel of furnish of a door of a back (fig. 8.8).

Turn off four nuts and remove a decorative overlay of a door of a back.

Fig. 8.9. Removal of lamps of illumination of registration plate

Unscrew four screws and remove lamps of illumination of registration plate (fig. 8.9).

Fig. 8.10. Removal of the central console of a door of a back

After removal of assembly nuts (2EA) disconnect a core and remove the central console of a door of a back (fig. 8.10).

Fig. 8.11. Removal of a cleaner of back glass

Remove the lock cylinder, having turned out an assembly bolt, and remove a cleaner of back glass (fig. 8.11).

Disconnect the socket of power supply of the electric motor of an ochitstitel of back glass.

Fig. 8.12. Removal of the electric motor of a cleaner of back glass

Remove the electric motor of a cleaner of back glass after removal of an assembly nut (fig. 8.12).

Remove executive mechanisms of levers of a back door, disconnect sockets and remove levers.

Fig. 8.13. Lever of a door of a back

Remove a clamp of a door of a back.

Take out the elevating adaptation of a back door from the spherical hinge.

Remove a back door after removal of assembly bolts of the hinge of a back door.

Installation

Installation is made as it should be, the return to removal.