Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.7.1. Main malfunctions and their reasons
2.7.2. Check of a technical condition (Check of frequency of rotation of the crankshaft of the engine idling)
2.7.3. Check of operability of the fuel pump
2.7.4. System of compulsory ventilation of a case
2.7.5. Catching system паров fuels
2.7.6. System of supply of fuel
2.7.7. Check of a control system by the engine with the distributed injection
2.7.8. Removal, check and installation of fuel nozzles
2.7.9. System of decrease in toxicity of the fulfilled gases
2.7.10. Removal and installation of the main exhaust silencer
2.7.11. Check of tightness of system of production of the fulfilled gases
2.7.12. Cars with catalytic converter in system of production of the fulfilled gases
2.7.13. Service regulations of cars with catalytic converter in system of production of the fulfilled gases
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 









2-7-10-snyatie-i-ustanovka-osnovnogo-glushitelya.html

2.7.10. Removal and installation of the main exhaust silencer

Fig. 2.274. Components of system of production of the fulfilled gases



Removal

ATTENTION
Before the beginning of operations of removal or check of components of system of release be convinced that they cooled down enough.


Fig. 2.275. Detachment of the main exhaust silencer


Disconnect the main exhaust silencer from the central pipe of system of release (fig. 2.275).

Fig. 2.276. Rezinometallichesky arms


Remove rezinometallichesky arms and remove the main exhaust silencer (fig. 2.276).
Disconnect the central pipe of system of release (with the forward exhaust silencer) from a reception pipe of system of release on the one hand and from the main exhaust silencer with another.
Remove rezinometallichesky arms, and then remove the central pipe of system of release (with the forward exhaust silencer).
Unscrew bolts of fastening of an arm of a reception pipe of system of release and disconnect a reception pipe from catalytic converter.
Unscrew bolts of fastening of a reception pipe of system of release to the central pipe of system of release (with the forward exhaust silencer).

Installation
Establish components of system of release in the following order: at first reception pipe of system of release, then central pipe of system of release and main exhaust silencer. Temporarily tighten fastening of components of system of release.
Reliably tighten fastening of components of system of release. Be convinced of absence of contact of components of system of release with any details of a body of the car.

«previous page
2.7.9. System of decrease in toxicity of the fulfilled gases
following page»
2.7.11. Check of tightness of system of production of the fulfilled gases