|
8-3-10-snyatie-i-proverka-modulya-frontalnojj-podushki-bezopasnosti-voditelya-dab.html
8.3.10. Removal and check of the module of a face-to-face safety cushion of the driver (DAB)
|
|
Fig. 8.46. Module of a face-to-face safety cushion of the driver (DAB)
|
Removal
|
|
Fig. 8.47. Removal of the negative plug of the storage battery
|
Disconnect a wire from the negative plug of the storage battery and reliably заизолируйте I will corrode wires (fig. 8.47).
|
ATTENTION
Before the beginning of works after a detachment of a cable of the storage battery make a pause not less than 30 pages.
|
|
|
Fig. 8.48. Removal of an overlay of a steering wheel
|
Remove lateral covers of a steering wheel. Unscrew bolts of fastening of the module of a safety cushion (an internal shestigrannik) (fig. 8.48).
Disconnect the socket of an hour spring from the pillow module, having pulled for a socket clamp outside (fig. 8.49).
|
ATTENTION
At a detachment of the socket do not apply considerable efforts.
|
|
|
Fig. 8.50. Removal of the module of a safety cushion
|
Remove the module of a safety cushion of the driver (fig. 8.50).
Unscrew a nut of fastening and by means of a stripper (09561-11002) dismantle a steering wheel (fig. 8.51).
|
ATTENTION
Do not remove a steering wheel in the shock way: it is possible to damage the mechanism of folding of a column at collision.
|
Module check
If as a result of check any defective detail is found, replace the safety cushion module with the new.
The old safety cushion is subject to blasting on special procedure.
|
ATTENTION
Never try to measure resistance of an electrofuse of a pillow, even by means of a special tester: sudden blasting a pillow which will lead to accident is possible.
|
Check an overlay of the module of a pillow (a hollow, cracks, deformation).
Check the case of the module of a pillow (a hollow, cracks, deformation).
Check a socket condition (deformation of contacts, clamps, twisting of wires).
Check the inflatable module of a pillow (a hollow, cracks, deformation).
Establish the pillow module on a steering wheel for verification of the relative provision of a pillow and a steering wheel.
Check of an hour spring
If as a result of check any defective detail is found, replace an hour spring with the new.
Check a socket condition (deformation of contacts, clamps) and a protective tube.
|