|
3-2-2-snyatie-i-ustanovka-mekhanicheskojj-korobki-predach.html
3.2.2. Removal and installation of a mechanical box предачRemoval
Remove a drain stopper and merge oil from a transmission.
Remove the working cylinder of a hydraulic actuator of coupling.
Remove the case of the air filter assembled.
Remove the storage battery and its pallet.
Disconnect a cable of a choice of transfers and a gear shifting cable (fig. 3.37).
|
|
Fig. 3.38. Socket of the switch of lamps of a backing
|
Disconnect the socket of the switch of lamps of a backing (fig. 3.38). Disconnect a cable of a drive of a speedometer.
Disconnect a cable of a drive of coupling or a tube of a hydraulic actuator of coupling.
Remove the bottom protective casing of the engine and a lateral cover of a check point.
Remove forward and back support of the engine assembled.
Remove the left and right forward wheels assembled.
Unscrew a bolt of fastening of a forward rack of a suspension bracket to a rotary fist.
Remove shaft of a drive of wheels.
|
|
Fig. 3.40. Engine fixing on the special adaptation
|
Fix the engine on the special adaptation (a traverse 09200-38001) for fastening arms (fig. 3.40). Remove a transmission support (at the left).
Unscrew the top bolt of fastening of a transmission.
|
|
Fig. 3.41. Fastening of a protective cover of a case
|
Remove a protective cover of a case of a check point (fig. 3.41). Establish under a transmission a transmission telescopic rack (Jack T/m).
Unscrew the bottom bolt of fastening of a transmission.
Remove a casing of coupling and a conducted disk of coupling.
Remove a flywheel.
Remove a transmission.
Installation
Installation of details is made as it should be, the return to removal.
| 