1.4.2. Operation of the stereoreceiver (Н220) (the additional equipment)
ON/VOL (switch adjustment food / handle loudness / handle of adjustment of the left / right stereobalance, scanning switch).
The radio receiver works, when the ignition key is in the situation "ON" ("Incl.") or "ASS" («The additional equipment»). Turn the handle clockwise to include a food and to increase loudness. On the liquid crystal display in a mode of reception of radio station frequency of accepted radio station is shown. to reduce loudness and to switch off a radio receiver food, turn the handle counter-clockwise.
BAL (handle of adjustment of the left / right stereobalance).
Pull for the handle and turn it clockwise to increase loudness of the right loudspeaker (loudness of the left loudspeaker will decrease). At handle turn counter-clockwise, loudness of the left loudspeaker (loudness of the right loudspeaker decreases) increases. After adjustment drown the handle in former situation to use other its functions.
SCAN (the handle of automatic tincture of accepted stations).
By pressing this handle frequency increases and the receiver is adjusted during 5 with on one for another accepted stations. For the termination of automatic tincture again press this button.
FAD (handle of adjustment of forward / back stereobalance).
Turn the handle counter-clockwise to increase loudness of forward loudspeakers (loudness of back loudspeakers decreases). At handle turn loudness of back loudspeakers (loudness of forward loudspeakers decreases) clockwise increases.
BASS (the handle of adjustment of a timbre in the field of low sound frequencies).
Press on the handle that she was nominated outside, and turn it to the left or to the right to establish a desirable timbre in the field of low sound frequencies.
TREBLE (the handle of adjustment of a timbre in the field of high sound frequencies).
Extend the handle put forward outside in the following fixed situation. Turn it to the left or to the right to establish a desirable timbre in the field of high sound frequencies.
FM/AM (button of a choice of a range).
By pressing this button there is a switching of ranges of AM, FM1 and FM2. The chosen range is displayed on the liquid crystal display.
TUNE (button of manual tincture of frequency).
Press the parties
this button to increase or reduce frequency. If to hold this button more than 1 signal of a stop (a steady signal of radio station) it will be ignored and following search will proceed.
Automatic tincture of frequency.
Press and hold the control of frequency (TUNE) pressed the button during 1 with or more long. By pressing the party
, a radio receiver it will automatically be adjusted on the following station with a steady signal and higher frequency of a broadcasting, and by pressing the party
– the radio receiver will automatically be adjusted on the following station with lower frequency of a broadcasting.
Buttons of storing of stations.
You can bring in memory of this radio receiver on 6 stations in each of ranges of AM, FM1 and FM2.
Storing of frequencies of stations
It is possible to bring 6 stations in memory of an audiosystem in a range of AM and 12 stations in FM range. After that it is possible to choose by pressing of the button of a choice of a range and one of six buttons of storing of stations one of them. to put in memory these stations, execute the following operations:
– press the button of a choice of a range to choose one of ranges of AM, FM1 or FM2.
– choose station which want to keep in memory, using manual or automatic control;
– choose the button of storing of stations to which should appropriate this station;
– press and hold pressed this button of storing of stations within two or more seconds. On the display there will be an index with number of the chosen button of storing of stations. After entering in memory of frequency its value will blink on the display. Release the button and continue storing of the following desirable station.
In total it is possible to program 18 stations, having appropriated to one button one station of a broadcasting in a range of AM and two – in FM range.
Upon termination of programming include any of the programmed stations after a choice of one of ranges of AM, FM1 or FM2 and pressing the corresponding button of storing of frequencies of stations.